[ Chinese wardrobe net ] The cloakroom is the favorite of women, because they have a very large demand for storage space in the room, it is very important to design a limited space. With the popularity of the walk-in cloakroom, this "combination wardrobe " which can be freely changed and can be large or small has become another mainstream product of the wardrobe design on the market. However, in the selection criteria of the wardrobe, how to judge the quality of the wardrobe?
1. Is the custom wardrobe structure firm?
Small wardrobes, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating that the quality is good; if the sound is dumb, there is a murmur in the slap, indicating that the eyes are combined Not tight, the structure is not strong. The table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on the move, you will slam, and when you shake it, it will be nailed and it will take a long time. Special note: square legs, tables, chairs and other legs should have 4 triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.
2. Mirror wardrobe should take a photo
Choose a wardrobe with mirrors, such as a dressing table, a mirror, and a mirror. Take care of it and see if the mirror is deformed. Check if there is a liner and backboard in the mercury at the back of the mirror. Qualified, no paper, no, otherwise the mercury will be worn away.
3. Determine if the wardrobe is stable.
Whether the four feet of the custom-made wardrobe are flat or not, the four feet of the wardrobe are flat, and the wardrobe is placed on the flat ground and you will know. Some wardrobes have only three legs to land, and the stability is definitely not good. Also look at the desktop is straight, can not bow back or collapse, if the table is raised, the glass plate will be rotated to turn; if the table is recessed, the glass plate will be crushed by a pressure. In addition, we must also pay attention to the inspection of the cabinet door, the slit of the drawer should not be too large, we must pay attention to the horizontal and straight, the door can not sag.
4. Is the custom closet edge flat?
The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The wardrobe with the plywood package is nailed with nails. Pay attention to whether the nail holes are flat and the color of the nail holes is consistent with other places. Usually the nails are sealed with putty. Pay attention to whether the putty is bulging. If it is bulging, it will not work. Slowly, the putty will fall out from the inside.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscare.com