[ Chinese wardrobe net ] The whole wardrobe refers to a coordinated, full-featured, safe and stable wall cabinet with a combination of multiple units of cabinets according to the specific size of a certain space part of the home.
In the early days, under the restrictions of crafts and materials, the folks basically did not have a whole wardrobe, but a small unit independent cabinet. Some large families will use larger crafts cabinets. The cabinets of the counters and pharmacies in the shops are considered to be the prototype of the overall wall cabinets. The entire wall cabinet in the Royal Palace has been formed. In the absence of modern hardware and modern craftsmanship at the time, the overall wall cabinet was only hand-made by the carpenter, so these overall wall cabinets appeared to be single in style and lacking in function.
The modern overall wall cabinet was created by the shortage of residential space, emerging materials and craftsmanship. The overall wall cabinet is divided into three categories according to the functional partition in the modern home environment, including the whole cabinet, the whole wardrobe or the cloakroom and the overall bookcase. The overall wall cabinet is mainly made of a comprehensive application of plates, hardware and electrical appliances. The main plates are particle board, MDF, large core board, stone board, steel board, glass, etc. The hardware is mainly: handle, hinge, pull rail, pull basket, hinge, lock, connecting piece, edge decoration And other metal parts. Electrical appliances are mainly used in the whole cabinet, there are hoods, stoves, disinfection cabinets, water heaters, etc.
Modern whole wall cabinets are mainly made for the specific space of the home. The whole wardrobe and the whole bookcase are combined in many families. To make full use of the precious space in the home, most of them are top-of-the-line and seamlessly designed. Most of the overall wall cabinets are made to order, because the finished standard cabinet is difficult to effectively use the valuable space of the modern home environment, and the finished cabinet is also difficult to match the modern personalized home environment. Therefore, the ordering of the overall wall cabinet requires the manufacturer to measure the exact size of the user's home, and comprehensive communication with the user to determine the overall function and safety and durability of the overall wall cabinet required by the user. After this, the surveyor should provide the user with a sketch of the overall wall cabinet. After the initial confirmation by the user, the surveyor will hand over the sketch to the designer. After reviewing or correcting the designer, the designer will communicate with the user. , is made to draw the whole wardrobe formal drawings, the whole wardrobe or three-dimensional design drawing sheet of FIG whole wardrobe renderings. The overall wardrobe design drawings, the overall wardrobe renderings or the overall wardrobe picture, under the user's approval, became the only basis for ordering the whole wardrobe.
The whole wall cabinet generally goes through the following links in the modern production workshop. First, the detection of the main board. It is mainly to review the secondary series of indicators such as the surrounding properties, strength, fire resistance, water resistance, surface and core material texture. Second, the cutting of the board. The modern assembly line has micro-computer-controlled precision saws or laser tools to cut the panels into all the panel parts of the overall wardrobe. If the overall wall cabinet has special requirements for fireproof performance, the corresponding sheet treatment should be done before this step. Third, the edge of the board decoration. The exposed core of the sheet is generally sealed with a fully automatic edge banding machine. The edge-sealing material is generally decorated with pvc or metal-sealed with a card slot. Fourth, the use of automated drilling, precision plated all the plates, so that the overall wardrobe accurately fixed the position of the plate during the installation process. If you are using a lacquer or lacquer finish, you should make a finish in the paint booth before this step. 5. Trial installation, factory inspection, packaging, transportation, etc. of the whole wardrobe. Sixth, the installation, commissioning and testing of the whole wall cabinet. At this point, a complete wardrobe is handed over to the user.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetsdoggze.com