[ Chinese wardrobe network ] In modern society, with the improvement of the quality of life, people gradually began to pursue the "green" home environment, the same is true for furniture, and its "health and environmental protection" performance has gradually become the focus of people's attention. Therefore, solid wood furniture is more and more popular and sought after by people, and when buying solid wood furniture, the purchase of solid wood wardrobe is the most important. Therefore, how to choose solid wood furniture? The following small series introduces the six golden rules for selecting solid wood furniture, only for the production test.
Health and environmental protection into the focus of the six golden rules of choosing solid wood wardrobe
First, verify the solid wood
A mystery to judge whether it is solid wood furniture is: wood grain and thrift. Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood wardrobe door. In addition, watching thrift is also a good way to identify solid wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
Second, judge the tree species
This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. Now the price of wood is rising, and it is absolutely cheap to be too cheap.
Third, looking for defects
The main force-receiving parts of the closet, such as the uprights and the load-bearing horizontal strips connecting the columns to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.
Fourth, the test intensity
The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix it. If the skeleton is sparse, the surface will feel empty and false.
Five, touch the surface
Place your hand on the surface of the furniture and carefully check the smoothness of the polished surface for cracks or bubbles. When the panel is covered with thin wood and other materials, the color of the product should be similar, and the paint film on the surface of the product is not allowed to wrinkle, stick and leak paint.
Six, "stand up" test
Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges. Is the strip fastened to the crosspiece? There is no excess glue or filler in the seam.
The polypropylene composite cap for plastic infusion container comprises of the pullâ€tab outer cap, inner cap, and synthetic medicalâ€level polyisoprene cushion; among which, the materials for the inner cap and outer cap are the imported medicalâ€level polypropylene, complying with the FDA rules and passing the USP CLASS VI test; the synthetic medicalâ€level polyisoprene cushion can be made from the imported product on the request of user. The inner cap of the composite cap will contact with liquid medicine directly to ensure the quality; whereas the cushion will be helpful to prevent penetration and seal whilst infusing the liquid medicine, and the outer cap plays a role to prevent bacterium.
The composite cap is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, assembly and inner packing and so on, are designed and processed as per the
cleanliness requirements at the partial level of Class 100, which passes the GMP onâ€site certification and complies with the cleanliness
requirements of high capacity injection medicine.
The facilities involved by production, test and inspection of composite cap are available, with strict control and management to be conducted in the whole process of production, free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such facilities may ensure the product quality.
The polypropylene composite cap for plastic infusion container is mainly used for nonâ€PVC softâ€bag infusion and polypropylene plastic bottle infusion.
PP Composite Cap For Plastic Infusion Container
Pp Cap,Plastic Cap For Infusion Container,Pp Cap For Plastic Infusion Container,Caps For Infusion Containers
YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , https://www.hongyunyz.com