One: install the exhaust pipe
In 1997, the factory purchased a Komori offset press that uses pneumatic transmission. Every day after work, air is discharged from the air compressor. Due to the environmental and humidity of the workshop environment, a lot of waste water is discharged from the air compressor. After a long time of use, the ground will leave a water mark and it will not be easy to clean. Work environment, ground appearance.
The author was inspired by the decompression exhaust pipe for household electric water heaters. A plastic pipe with a diameter of 10 mm was connected to the exhaust port of the air compressor. One end was connected to the air compressor air discharge pipe, and the other end was inserted into a water outlet (water tank drain This will not only facilitate the discharge of waste water, but also reduce the pollution of the waste water to the ground. This method also applies to other offset presses.
Two: small offset press with modified
In 2002, the factory borrowed a Japanese-made AR-010 small offset press from the Bank of China Card Factory. When borrowed, the machine has a long service life, and the feeding belt is smooth and sticky. Every time printing is deviated from the positioning wheel, one of the four feeding belts has been broken and cannot be used. There are no results from contacting the manufacturer many times. Because the problem of the paper conveying belt may cause the production to stop, the author found the offset roller lining cloth used in the offset printing machine, docked the interface with the sewing machine, and made the interface follow the paper feeding direction. After loading, the paper positioning effect is very good and solves a major problem in the work.
Technical parameters:
|
Technical parameters |
MINGTAI LED760 |
MINGTAI LED560 |
|
Illuminance (lux) |
180,000 |
130,000 |
|
Color Temperature (Kelvin) |
4,300 |
4,300 |
|
Adjustable Color Temperature (Kelvin) (Optional) |
3600-5600 |
3600-5600 |
|
Color Rendering Index (CRI) |
96 |
96 |
|
Red Color Index (R9) |
96 |
96 |
|
Light brightness control |
standard |
standard |
|
Brightness control range |
10-100% |
10-100% |
|
Temp rise (Surgeon head) (Celsius degree) |
0.5 |
0.5 |
|
Temp rise (surgical field) (Celsius degree) |
2 |
2 |
|
Effective Focusing Depth (cm) |
60-150 |
60-150 |
|
Total Irradiance Ee (W/m2) |
530 |
470 |
|
Radiant Power Ee/ Ec (mW/m2lux) |
3.3 |
3.3 |
|
Lighting Spot Size (mm) |
100-260 |
100-260 |
|
Bulb Type |
LED |
LED |
|
Average Bulb Life (hours) |
60,000 |
60,000 |
|
Bulb Quantity (main bulb+ auxiliary bulb) |
128LEDS+384LEDS |
56LEDS+168LEDS |
|
Depth of illumination L1+L2 (cm) |
130 |
130 |
|
Power Consumption (W) |
70 |
50 |
|
Height adjustment (cm) |
118 |
118 |
|
Power Input |
100-240VAC, 50/60Hz |
100-240VAC, 50/60Hz |
Special advantage:
Protected by patent No. ZL 2013 2 0354946.9, do not infringe
1. High strength ABS material, ultra-thin light head, integrated surrounded 4 group handle design, meeting laminar flow requirements, easy to operate
2. Intelligent spot control technology: Light intensity not change when spot size changed
3. Intelligent shadow control technology: when light was sheltered by surgeon head, correlated LED light will automatically darken, other LED lights which are not sheltered will increase brightness, compensate the illuminance loss in surgery field, provide a better shadowless rate, bring the perfect surgical lighting (optional)
4. Variety of Surgical environment lighting mode: bright, normal, endoscopic lighting mode; Base axis has ambient light lighting mode (optional)
5. Satlite oval hanging main arm, meet laminar flow requirement
6. Double control system (optional), Li battery (optional), electric focus adjustment system (optional), RGBW color adjustment system (optional), independent R9 function (optional), manual focus adjustment function (standard)
7. Base configuration: Germany imported balance arm system, light head is designed by Germany engineer, USA LED bulb, Taiwan power system
Product feature:
1. Lamp shell is ABS material, integrated design with four handles around and streamlined ultra-thin design, the thickness is not more than 18CM, obtain excellent effect of laminar flow
2. Use international advanced warm white LED as shadowless illuminant, environmental, lower energy consumption LED bulb, bulb life: 60000 hours
3. LED do not engender infrared ray and ultraviolet radiation, it doesn't have the temperature rise and tissue damage caused by halogen shadowless light, can accelerate the wound healing after surgery, and has no Radiation pollution
4. LED color temperature is constant, soft and not dazzling, close to natural light
5. The main light use 128LEDS(main bulb)+384LEDS(spare bulb) independent LED illuminant (lamp cup is one main and three spare bulb structure), divided into multiple independent illuminant group, subsidiary light use 56LEDS(main bulb)+168LEDS(spare bulb) LED illuminant (lamp cup is one main and three spare bulb structure), divided into multiple independent illuminant group; every lamp use double CPU control, every group of LED illuminant controlled by special circuit chip, any group failure will not affect the normal use of shadowless light.
6. Double switch control system, when control panel failure, emergency switch which installed on light head can be used, guarantee light normal work. Control panel in the spring arm joint, film touch switch, easy to use, Not easy to damage
7. Microcomputer digital control, illumination can be adjustable; stepless adjustment, eight segments continuous indicating, adjustment range: 10%-100%, backlight illumination: 30 Lux; it offers illuminance memory function
8. Adopt restrain interference design of electromagnetic wave, avoid disturb with the other equipment in operating room
9. Use satlite oval swing pipe design, can install 4 cantilever devices in complex operating room, also can be reserved per hospital's request, convenient to upgrade and provide perfect solution for the increasing multi-media request of hospital
10. Balanced system using imported German Ondal arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360 celsius degree, equipped with fatigue correcting unit and fix position hand handle device, easy to fix position after using for long time
11. The handle on the central of lamp can be detachable, can take high temperature (134 celsius degree) sterilization treatment, easily adjust, flexible fixed; Adopt balanced arm, handy operate, and make sure the lamp stable during operation; has C-arm joint control panel, has luminance prompt facility, provide environment lighting models
12. Lamp panel radius of gyration: 182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination. Unify ABS operate handle and mid-operation handle of Lamp rim convenient to operate. Product execute international IEC standard.
Flower Girl Dresses,Party Flower Girls Dresses,Flower Girls Unicorn Dress,Cotton Flower Girl Dresses
bossgoo Technology Co., Ltd. , http://www.bossgoodemo.com