[ Chinese wardrobe net ] The most technical content of woodworking engineering is the project of wood products in furniture decoration. Among them, including doors, shoe cabinets, windows, wardrobes, etc. Every project has corresponding requirements, the production must be meticulous, and the stitching needs to be strict.
Woodworking engineering is one of the most important things in home decoration. In the decoration process, the production cost is a large proportion, and the woodworking technology content is also the largest. So what is woodworking? That is to say, the woodworking work often mentioned in the home decoration, that is, the material in the home decoration construction process is a sub-project based on wood products.
In the woodwork project, the main construction projects include ceilings, doors, wardrobes, cabinets and so on. Only knowing the technical requirements can you check whether the woodworking project is qualified. Therefore, it is very important to master the requirements of woodworking technology. Let's take a look at it!
Introduction to the technical requirements of woodworking engineering:
1. The woodworking process requires firm installation, the surface is smooth and clean, the lines are straight, the joints are tight, the color is consistent, and there must be no crack warping and damage. The allowable error value is 3MM of the vertical side and 1MM of the upper level. The flatness of the panel is 2MM. It should be noted that the side of the door hinge should use two layers of wood board.
2, a door is the shoe cabinet, the shoe cabinet is also the first image in the home environment. For drawers and shoe cabinets, solid wood lines should be used to close the mouth, brown eyes should be smoothed, and the joints should be tight and smooth. The mounting rails of the slide rails, hinges and handles are firm and loose, and the screws are complete. It should be guaranteed that there should be no paint pollution.
3, when installing the door hinge should pay attention to, should be double-sided grooved, the groove and the depth should be determined according to the hinge, to ensure that the hinge is tight after installation, the screw should be full, note that how to open the door More than 1.2M must use 3 hinges.
4, door and window fans should ensure that the surface is smooth and smooth, no hammer printing, no scratches, accurate cutting angle, tight seams, flexible switch, no block, rebound warping and deformation. Door warpage can not be greater than 3MM, door flatness error should not be greater than 3MM, 2-3MM between door and window fan and upper cabinet, door gap and ground clearance except bathroom 8-12MM, others are 5-8MM, door and window fan The error of the side cabinet should be kept at around 2-3MM.
5, it should be noted that the upper and lower mouth of the door should pay attention to the sealing treatment, the door cover should be installed inside the sealing strip, it is best to reserve 3 to 5 mm, in order to ensure the door's sealing and safety.
6. The groove of the sleeve and the flat slotted door should be smooth and there is no bottom penetration. The side of the door sleeve should be relatively smooth and there is no bottom penetration.
7. Concave shape door shape The slope panel is tightly contacted with the bottom shape, and the corners are not cracked. The joints of the angle of the Yin angle are tight and natural, and the treatment is relatively detailed.
8, in the color matching should pay attention to, clear oil door and line color should be close, so it looks more beautiful.
9. The throttle line of the fuel-filled door should use the 12-m thick Australian pine board; the clear-oil door line must be made of natural solid wood line to be padded with a 9-inch Australian pine board to ensure the safety of the door.
10, the wardrobe door is not double-sided blockboard on the side of the wall, the mouth should be straight, the seams should be strict, the color should be consistent, and there should be no cracks and damage.
11, the cabinet should be attached to the Boeing film, the film should ensure that there can be no empty drums, bubbles, wrinkles, curling, no leakage and subsidies, the edges should be neat, straight, no burrs, no paint pollution.
The above is an introduction to the woodworking project by Xiaobian. Through the explanation of the above eleven points, everyone should have a systematic understanding of the woodworking acceptance.
Lip Balm,Fresh Lip Balm,Glossier Lip Balm,Natural Lip Balm
Guangzhou Boxuanya Cosmetics Co., Ltd. , https://www.bxycosmetic.com