[ Chinese wardrobe network ] With the improvement of people's living standards, more and more people are decorated with a large wardrobe at home, spending so much manpower and material resources, naturally attaching great importance to the maintenance of the wardrobe, the wardrobe sliding door as a whole wardrobe An important part of the overall wardrobe decoration effect, maintenance needs to be more careful, but in daily use, the wardrobe sliding door will inevitably have some minor problems, then how do we deal with it, how to maintain the wardrobe sliding door?
First, the wardrobe common door failure and troubleshooting methods
1, the wardrobe sliding door can not move
1 Hanging rails and hanging wheels are not matched with optional goods;
2 The hanging wheel bearing is damaged or the outer layer is damaged to replace the upper part of the hanging wheel;
3 Nanjing wardrobe sliding door bottom touches the ground to adjust the height of the door;
4 bracket deformation causes the door to sag; replace the bracket.
2, heavy hand feeling, moving difficult
1 Hanging rail and hanging wheel are not matched.
2 When the hanging rail device is deformed, the hanging rail is replaced;
3 The hanging rail does not adjust the horizontal plane of the hanging rail from the head horizontally;
4When the wardrobe sliding door is touched on the ground, or the positioner and the Nanjing wardrobe sliding door are not on a vertical line, adjust the door height or move the positioner orientation;
5 The quality of the hanging wheel bearing is poor or there is no bearing at all, or the outer cladding is too soft to replace the hanging wheel;
There are concave and convex adjustment doors on the left and right sides of the door.
3, there is a slamming or creaking sound
1 There is waste in the hanging rail to remove the waste in the hanging rail;
2 The bearing itself has poor quality or there is waste in the bearing to replace the hanging wheel;
3 bearing outer cladding has dents, no lubrication or significant film line, burr replacement hanging wheel;
4 The suspension rail is not flat and has a burr to replace the hanging rail.
4, loud noise
1 The hanging rail is too thin, use a thick hanging rail, or put hardwood on the two sides of the hanging rail;
2 Lubrication, uneven, burr with lubricated, flat hanging rails;
3 The fixing screws are not tightened, or the longer screws are replaced;
4 The fixing screw has a large distance to increase the fixing screw;
5 Hanging rails and Nanjing wardrobe sliding door frame have gaps to make the hanging rails close to the door frame;
6 hanging wheel bearing itself poor quality replacement theory;
7 The outer layer of the hanging wheel is not round, with dents, burrs or film lines to replace the hanging wheel.
Second, the wardrobe sliding door maintenance
In the long-term use of sliding door, due to the deposition of dust and dirt, especially when the air contains sulfide, it must be cleaned on time. The cycle is generally half a year. When cleaning, it is necessary to clean the surface dirt without damaging the surface oxide film. Electrophoresis composite membrane, spray powder.
1, sliding door cleaning
1 Regularly clean the surface of the sliding door with a soft cloth dampened with water or a neutral detergent. Do not use ordinary soap and washing powder, and do not use strong acid-base cleaners such as decontamination powder and toilet cleaner.
2 It is not allowed to use sandpaper, wire brush or other abrasives for cleaning. After cleaning, wash it with clean water, especially in places with cracks and dirt. Also use a soft cloth dampened with alcohol to scrub.
3 If the main material of the sliding door is made of sheet material, the moisture of the wet cloth used in cleaning should not be too much, as long as it is moisturized.
2. Track protection
Keep the track clean and prevent foreign matter from entering. If there are debris and dust, use a brush to clean it. The dust in the tank and the door can be sucked out by a vacuum cleaner.
3. Maintenance of internal accessories
Keeping the sliding door good performance The sliding door seems simple, but the structure and accessories are still more. The protection of the track and other aspects is very important. The sealing top and the glass seal are the key structures to ensure the sliding door sealing, heat preservation and sound insulation. If it falls off, it should be repaired and replaced in time, so as to achieve the best effect of dust, collision, sound insulation and heat preservation.
Baby Cart,Hospital Baby Trolley,Hospital Baby Cart,Hospital Baby Crib
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jiamei-medical.com