Single-sided machine - high or low rate

The rate problem caused the gluing on one side of the corrugated stencil more than on the middle part of the corrugated screed, and the paste formed on the ±K 楞 side concentrated most of the paste.
The reason for this problem is that the linear speed of the top roller surface and the bottom line surface speed of the bottom corrugating roller do not meet the standard speed requirements set by the competitors (usually the speeds of the two are not exactly the same). The paste is not applied on the top of the K楞 accurately, which reduces the application effect of the paste and makes the adhesive strength on the top of the corrugated lid very weak.