Machinery equipment manufactured by Challenge
Although the UL-listed Challeng Medalist 870 folding machine provided by Challenge is a floor model, the volume is only slightly different from that of a desktop machine. There are 30,000 sheets of 8.5 × 11 inch paper per hour, and the folding size can be up to 14 × 20 inches.
The entire machine consists of a blow air separator, a vacuum transfer device, an adjustable metal sheet separator, an up and down swing deflector, a combined rubber/steel roller, an adjustable drum caliper, and a control panel mounted on the upper part of the machine. The control panel is equipped with a paper counter, a 0.875" slitting shaft, a jam detection system in the delivery area, a soundproof cover, etc. A right-angle double-folder is also included.
The UL-listed Challenge EH-3C triaxial boring machine is a paper punching device manufactured by Challenge. It adopts hydraulic transmission system, and the drill bit is automatically reset to perform single-hole, double-hole and three-hole synchronous drilling. Aperture 2.5 inches.
UL-listed Challenge The Titan 200 and 265 are programmable cutters produced by Challenge. The width of the cut paper is 20 and 26.5 inches, respectively. Features include: hydraulic drive clamping and cutting, electronic clamping pressure control, mechanical foot pedal control paper, LCD indication of the tail measurement position, LCD screen drive, contains 99 channels, 3465 kinds Cutting memory, also equipped with a touch-type electronic keyboard for variable-speed tail measurement position control. The opening width of the paper gripper is 3.25 and 4 inches, respectively.
At the Grap Expo 99 show, Challenge launched the SideWinder screw inserter, which can insert a 6-30mm diameter plastic screw for manuals, presentations, reports or other documents. 200 can be processed per hour. Book sizes range from 4 x 5 to 14.5 x 14.5 inches and can be up to 1 inch thick. The machine is also equipped with a four-bit bent tail measuring instrument with separators, which can automatically arrange the manuscript in the direction of the screw hinges. The system achieves overall control through a foot pedal and a roller speed plate on the front panel.
At the show, Challenge also showed a Spartan 120 paper cutter. The top of the machine is flat and looks frosted. Performance is comparable to mainframes. The hydraulic system controls clamping and cutting, cutting 12 inches wide and 1.5 inches of paper clips open. The control system includes a digital display that locks the manual tailgauge, the tailgauge position, and a dual-arm cutter control. The safety measures of the machine have also been strengthened: the knife will be forbidden to fall until the front cover is not lowered.
Count Machinery Co. Machinery Equipment
PertMaster 18" is an automatic bench-top punching and creasing machine from Count Machinery Co., which is operated with a single button. The machine is equipped with a fan, and the bottom friction type automatic transfer paper ensures continuous uninterrupted transfer. Single-page paper can be used. Processing of coated paper and various separated or glued paper materials can process 26,000 pages per hour, allowing for automatic and quick exchange of holes, indentations, etc. Manufacturers can also provide this lightweight machine if necessary. frame.
Count Machinery Co. also has an Auto-Pro Air Plus combined mounter. Can automatically complete the coding, drilling, indentation and other work. Pneumatic feeding, delivery width of 18 inches. The user can press the menu to select the single action or linkage work mode, after which the microprocessor automatically completes the setting processing. The machine is also equipped with two programmable control coded print heads, which print up to 20 digits per page.
As a specialized digital coder, Tablematic Plus is a desktop coder. Manual and foot pedal operation, mainly to meet the requirements of rapid production of small batches. The working area of ​​the machine is 11.5 x 16 inches large and can only handle single sheets of paper. Clearly prints six digits. Cross-stitching can be used, and skip code printing.
Duplo USA Corp.
Duplo's new DBM-120 is mainly used for the production of booklets. The use of simple, fully meet the requirements of modern people. The machine adopts automatic production settings and the price is quite cheap. Can be used alone, but also with other equipment, such as printers, pagers, etc. to form a fully automated production line.
The DBM-120 presets five common formats for the user to choose from, and also leaves five custom formats. Settings, conversions, etc. are done by buttons. The machine is equipped with side guides, the cut-off, staple/folding position can be adjusted and controlled, and it is easy to switch between different jobs.
In addition, the machine can also be set to fold only options, equipped with a paper jam detector, low speed binding light, movable clip binding system, work conversion system, linkage protection cover and other devices, can produce 2,400 sets of manual per hour .
The intelligent IMF is designed specifically for one-on-one marketing services, direct mailing, billing, or other specialized services that require specialized, single-person, and individual user services. For normal paging work, it can also be fully qualified.
The IMF incorporates the Duplo DC-10000S's inspirative delivery collation and computer control system functions. By connecting the high-speed DC-10000S with IBM or its compatibles, the user can select different delivery paths according to the program and determine the order of the collation, the number of sheets per sheet, and the total number of sets. In this way, synchronization of multiple sets of work can be achieved.
With IMF, users can easily complete settings, storage, and upgrades. Various batch modes can also be programmed. Finished prints can be stacked directly or offline. Other functions include command menus, mixed binding of color documents and black and white documents, directory settings, and user database support.
The DBM-80 machine is another type of production manual. It integrates printing and bookmaking technology. Can be used stand-alone or with other machines.
DBM-80 is a short-run series of quick presses that fully meets the needs of the current on-demand printing market. Ability to complete fast prints such as brochures, press releases, flyers, price lists, etc. Vertical structure, small volume, can complete the 2000-page printing booklet 2000 sets per hour.
Can be used online with presses and digital front ends. The machine automatically sets the paper size. The sizes and cuts of the various manuals produced are automatically performed without manual intervention.
If it is used as a stand-alone unit, the settings can be controlled and converted by pressing the button. It also includes individual folding or manual feed settings, as well as the ability to mix color documents with black and white documents.
If you want to quickly complete specialized binding books in a limited space, the DB-250 desktop binding machine should be the best choice for the current short-run printing market. 200 pieces per hour can be produced. As long as the paper basket is placed in the clip, the system can automatically complete tasks such as clamping, fixing, and binding. The machine is also equipped with a hair-cutting knife with a groove in its upper part, which enhances the penetration of glue. The device also removes dust from the paper, making the binding cleaner.
Although the UL-listed Challeng Medalist 870 folding machine provided by Challenge is a floor model, the volume is only slightly different from that of a desktop machine. There are 30,000 sheets of 8.5 × 11 inch paper per hour, and the folding size can be up to 14 × 20 inches.
The entire machine consists of a blow air separator, a vacuum transfer device, an adjustable metal sheet separator, an up and down swing deflector, a combined rubber/steel roller, an adjustable drum caliper, and a control panel mounted on the upper part of the machine. The control panel is equipped with a paper counter, a 0.875" slitting shaft, a jam detection system in the delivery area, a soundproof cover, etc. A right-angle double-folder is also included.
The UL-listed Challenge EH-3C triaxial boring machine is a paper punching device manufactured by Challenge. It adopts hydraulic transmission system, and the drill bit is automatically reset to perform single-hole, double-hole and three-hole synchronous drilling. Aperture 2.5 inches.
UL-listed Challenge The Titan 200 and 265 are programmable cutters produced by Challenge. The width of the cut paper is 20 and 26.5 inches, respectively. Features include: hydraulic drive clamping and cutting, electronic clamping pressure control, mechanical foot pedal control paper, LCD indication of the tail measurement position, LCD screen drive, contains 99 channels, 3465 kinds Cutting memory, also equipped with a touch-type electronic keyboard for variable-speed tail measurement position control. The opening width of the paper gripper is 3.25 and 4 inches, respectively.
At the Grap Expo 99 show, Challenge launched the SideWinder screw inserter, which can insert a 6-30mm diameter plastic screw for manuals, presentations, reports or other documents. 200 can be processed per hour. Book sizes range from 4 x 5 to 14.5 x 14.5 inches and can be up to 1 inch thick. The machine is also equipped with a four-bit bent tail measuring instrument with separators, which can automatically arrange the manuscript in the direction of the screw hinges. The system achieves overall control through a foot pedal and a roller speed plate on the front panel.
At the show, Challenge also showed a Spartan 120 paper cutter. The top of the machine is flat and looks frosted. Performance is comparable to mainframes. The hydraulic system controls clamping and cutting, cutting 12 inches wide and 1.5 inches of paper clips open. The control system includes a digital display that locks the manual tailgauge, the tailgauge position, and a dual-arm cutter control. The safety measures of the machine have also been strengthened: the knife will be forbidden to fall until the front cover is not lowered.
Count Machinery Co. Machinery Equipment
PertMaster 18" is an automatic bench-top punching and creasing machine from Count Machinery Co., which is operated with a single button. The machine is equipped with a fan, and the bottom friction type automatic transfer paper ensures continuous uninterrupted transfer. Single-page paper can be used. Processing of coated paper and various separated or glued paper materials can process 26,000 pages per hour, allowing for automatic and quick exchange of holes, indentations, etc. Manufacturers can also provide this lightweight machine if necessary. frame.
Count Machinery Co. also has an Auto-Pro Air Plus combined mounter. Can automatically complete the coding, drilling, indentation and other work. Pneumatic feeding, delivery width of 18 inches. The user can press the menu to select the single action or linkage work mode, after which the microprocessor automatically completes the setting processing. The machine is also equipped with two programmable control coded print heads, which print up to 20 digits per page.
As a specialized digital coder, Tablematic Plus is a desktop coder. Manual and foot pedal operation, mainly to meet the requirements of rapid production of small batches. The working area of ​​the machine is 11.5 x 16 inches large and can only handle single sheets of paper. Clearly prints six digits. Cross-stitching can be used, and skip code printing.
Duplo USA Corp.
Duplo's new DBM-120 is mainly used for the production of booklets. The use of simple, fully meet the requirements of modern people. The machine adopts automatic production settings and the price is quite cheap. Can be used alone, but also with other equipment, such as printers, pagers, etc. to form a fully automated production line.
The DBM-120 presets five common formats for the user to choose from, and also leaves five custom formats. Settings, conversions, etc. are done by buttons. The machine is equipped with side guides, the cut-off, staple/folding position can be adjusted and controlled, and it is easy to switch between different jobs.
In addition, the machine can also be set to fold only options, equipped with a paper jam detector, low speed binding light, movable clip binding system, work conversion system, linkage protection cover and other devices, can produce 2,400 sets of manual per hour .
The intelligent IMF is designed specifically for one-on-one marketing services, direct mailing, billing, or other specialized services that require specialized, single-person, and individual user services. For normal paging work, it can also be fully qualified.
The IMF incorporates the Duplo DC-10000S's inspirative delivery collation and computer control system functions. By connecting the high-speed DC-10000S with IBM or its compatibles, the user can select different delivery paths according to the program and determine the order of the collation, the number of sheets per sheet, and the total number of sets. In this way, synchronization of multiple sets of work can be achieved.
With IMF, users can easily complete settings, storage, and upgrades. Various batch modes can also be programmed. Finished prints can be stacked directly or offline. Other functions include command menus, mixed binding of color documents and black and white documents, directory settings, and user database support.
The DBM-80 machine is another type of production manual. It integrates printing and bookmaking technology. Can be used stand-alone or with other machines.
DBM-80 is a short-run series of quick presses that fully meets the needs of the current on-demand printing market. Ability to complete fast prints such as brochures, press releases, flyers, price lists, etc. Vertical structure, small volume, can complete the 2000-page printing booklet 2000 sets per hour.
Can be used online with presses and digital front ends. The machine automatically sets the paper size. The sizes and cuts of the various manuals produced are automatically performed without manual intervention.
If it is used as a stand-alone unit, the settings can be controlled and converted by pressing the button. It also includes individual folding or manual feed settings, as well as the ability to mix color documents with black and white documents.
If you want to quickly complete specialized binding books in a limited space, the DB-250 desktop binding machine should be the best choice for the current short-run printing market. 200 pieces per hour can be produced. As long as the paper basket is placed in the clip, the system can automatically complete tasks such as clamping, fixing, and binding. The machine is also equipped with a hair-cutting knife with a groove in its upper part, which enhances the penetration of glue. The device also removes dust from the paper, making the binding cleaner.
5 Pairs Lashes,Classic Lashes,5 Pairs Eyelashes,Natural False Eyelashes
Zhengzhou Cuka Electronic Commerce Co., Ltd. , https://www.cukalashes.com