Jin Fuli helps you solve the problem of solid wood furniture identification

At present, there is no special solid wood furniture appraiser similar to the occupation to specifically identify solid wood furniture. If consumers want to identify whether their furniture is solid wood furniture, it needs to go to a professional testing institution and the corresponding testing costs are not cheap. However, you can refer to some small common sense to identify solid wood furniture to prevent being deceived. Jin Fuli Furniture http://jfl.cnjiaju.com/Share

First, verify the solid wood

A mystery to judge whether it is solid wood furniture is: wood grain. Such as a cabinet door, the appearance looks like a pattern, then the position corresponding to the change of the pattern, the corresponding pattern on the back of the cabinet door, if the correspondence is very good, it is a pure solid wood cabinet door.

Second, judge the tree species

This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood and eucalyptus. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.

Third, observe the wood

Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell it for a pungent smell.

Fourth, looking for defects

The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material.

V. Inspection intensity

The strength of the board surface can be pressed with a finger to feel the firmness of the board surface. One side of the material should have a well-shaped skeleton to fix. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The partition should be made of five-layer board.

Sixth, safety performance

Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict.

Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, the hand should be gently pulled forward, and the cabinet should not be tilted forward automatically; the glass of the bookcase door should be edging.

Seven, check the interface

Heavier furniture should be screwed with a protective block at the corner and glued. As for the back Plate part, it is also necessary to check whether it is set and the screws are attached.

Eight, test slide

The drawer should be strong and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to see if they are safe to use and connect properly.

Nine, touch the surface

Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the table legs are rough, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.

X. "Inverted" test

As for the table, check from the bottom. See if the seams are reinforced with screws and wedges, and the slats are fastened to the crosspieces? There are no excess glue and filler in the seams.


Porcelain Dinner Set


Porcelain Dinnerware Set, high quality, with different pattern, simple, modern, flower, vintage, cute .

Welcome OEM and accept your own band and design.

Porcelain dinnerware set: Dishwasher and microwave safe, durable and easy to care for, With CIQ, SGS, and LFGB certificate

Porcelain dinnerware set : can be round, coupe, square ,triangle ,irregular shape , 4 pieces, 16 pieces, 20 pieces -, Service for 4 people, 6 people -

We can make different combination of Dinnerware Sets as your requirement.Such as pizza plate,18 pieces dinner set.

Dinnerware Sets can be in different packing: bulk packing, gift color box, Mail Box, PDQ, Pallet packing, IKEA packing.

Payment terms: T/T or L/C

Delivery date: 45 days

Accept OEM and your own brand and design

Samples are available.

MOQ: 1000 pieces for bulk item, gift sets is 600 sets

Mixed order is accepted.

Any more question, please contact our customer service.



decal dinner set 1



decal dinne set 2


Dinnerware Set,Dinner Set,Porcelain Dinnerware Sets

Shenzhen Good-Always Imp.& Exp.Co.Ltd , https://www.good-always.com

This entry was posted in on