(Moulds, Deckles, and Supplies---Twinrocker's dishpan paper would)
Twinrocker's chronograph inventor was originally invented by Howard Clark of Twinrocker. It allows you to easily make paper at home and make each sheet appear different colors! It consists of 3 sets of plastic troughs. The bottom slot is a vat for holding water and catching overflowing water; the other two slots are used as molds and paper frames. Traditional paper molds are usually immersed in a vat of pulp, and the grooved mold system we talk about allows the operator to change the color of the paper, or add different inclusions, such as petals or leaves, to each individual paper. Wait.
Grooved Paper Guide Instruction Manual, 3 Grooves (Solution Bucket, Mould, and Paper Frame), Paper Size: 6-1/2/8-1/2-inch Weight = 2.0 lbs $29.50
Grooved Paper Components Twinracker Grooved Paper Components consist of a slot die, 12 felts, and a 1 gallon slurry.
Grooved Paper Components Grooved Paper Mould, Instruction Manual, 12 Sheets and 1 Gallon Twinrocker Prefabricated Cotton Fiber Sizing Weight = 11.5 lbs $59.0
Felt 12 "felt" (synthetic, non-woven), 12 x 18 inch, can be used to handle small pieces of paper.
Felt set of 12 pieces, approximately 12 x 18 inches Weight = 0.9 pounds $ 17.00
Unsupported rib mold This is a very strong mold, the polyester surface is tightly stretched, so no longer need support ribs. There are 3 optional sizes: 5-1/2 x 8-1/2 inches, 8-1/2 x 11 inches, and 11 x 14 inches. It is practical, sturdy and economical, and comes with a flat paper frame.
Unsupported rib mold 5-1/2 x 8 inches Weight: 0.7 lbs $44.50
8-1/2 x 11 inches Weight: 0.9 lbs $56.95
11 x 14 inches Weight: 1.3 pounds 86.25 US dollars
Various tangible paper frames suitable for unsupported molds
1. Envelope paper frame: A paper frame made of plywood birch plywood or pvc plastic that can be used to produce envelopes of size 4x5-1/2 inch. The processed envelope can accommodate 8-1/2*11-inch-sized paper folded into a square shape. It is recommended to purchase remoistenable adhesives to produce envelopes with sealing strips.
Envelope paper frame PVC plastic envelope paper frame, suitable for 8-1/2 x 11-inch mold weight = 0.5 pounds $ 16 Baltic Birch paper frame, suitable for 8-1/2 x 11-inch mold weight = 0.6 pounds 27.5 US dollars
2. Heart-shaped paper box:
Used to produce heart-shaped paper. This paper frame can only be made of PVC material. There are two sizes: one for 5-1/2/2-1/2-inch unsupported molds and the other for 8-1/2x11-inch unsupported ribs.
Heart-shaped paper frame PVC material, 4-3/4*5 inches, for size 5-1/2*8 1/2 inch mold weight = 0.3 pounds 12 USD
PVC material. 7-1/4*6 1/2" for Die Sizes of 8 - 1/2 * 11" Weight = 0.5 lbs. 16 USD
3. Circular paper frame: Can be used with 5-1/2/2-1/2-inch or 8-1/2x11-inch unsupported mold to produce round paper.
Round paper frame PVC plastic, 5 - 3/8 inch, for size 5-1/2 x 8 1/2 inch mold weight: 0.3 pounds 12 USD
PVC plastic, 8-inch for 8-1/2 x 11-inch molds Weight: 0.5 pounds 16 USD Material for the Baltic Birch, 8-1/3 inch, for 8-1/2 x 11 Inch mold weight: 0.6 pounds 27.5 US dollars
4. The custom-shaped paper frame is made of a waterproof “foam heart†and a custom-made special-shaped paper frame can be cut with a knife.
Custom Shaped Paper Frame 1/4 Inch Plastic Foam Heart, Suitable for 5-1/2 x 8-1/2 Inch Mold Weight = 0.1 lb 2 USD
1/4-inch plastic foam core for 8-1/2 x 11-inch molds, weight = 0.1 pounds, $ 3
1/4 inch plastic foam heart for 11 x 14 inch mold weight = 0.1 lb 4 USD
The basic components of unsupported mold and paper frame papermaking components provide beginners with all the necessary things to start papermaking. Includes: Unsupported mold with a flat paper frame; 4 mats, a basic guide booklet, 1 gallon made cotton fiber slurry. The mold can be used to produce 5-1/2 x 8-1/2 inch or 8-1/2 x 11 inch paper depending on the ordered assembly. This booklet can be obtained separately and additional materials can be ordered.
Rib-free rib mold assembly component A: Suitable for 5-1/2 x 8-1/2 inches unsupported rib paper die weight = 10.0 pounds 55 US dollars component B: for the size of 1/2 x 11 inches without support Rib die weight = 10.5 pounds 65 US dollars
The textbook package includes the "Papermaking Techniques and Techniques" written by Sophio Dawson; a flat paper die, an 8-1/2*11-inch paper frame; 12 mats; 2 ounce bottles of black, warm red, Warm yellow and blue pigments (our primary pigment); 5 gallons of pre-made 29# slurry in a bucket with moderate agitation.
Weight = 29.0 lbs $155.00
The Arnold Grummer tin pack Arnold Grummer developed this kit and included his book Tin Can Papermaking. With these components, it is easy to use two tin cans to recycle waste paper, which brings lots of fun to families and children. These components include: a papermaking screen; a support screen; a dewatering screen; 12 sheets of press-bonded paper; In addition, you must provide your own tin cans.
Tin can assembly weight = 0.4 pounds, $9.95
The latest GURMMER papermaking component is a perfect gift for paper-making beginners. It consists of a 30-minute paper disc, dip-type paper and paper frame, paper mesh screen, cover mesh screen, and two dry cloths. (Reusable), refined grain and cotton specialty pulp, dried flowers for papermaking, and instructions for using this component to produce paper briefcases.
Grummer Disc and Component Weight = 1.0 lbs $24.95
Book Binding and Paper Molding A qualified molding press produces 2,000 pounds of pressure and requires no maintenance. Can be used for bookbinding, as well as paper and flower molding, embossing, etc. Suitable for paper up to 8.5 x 11 inches in size. It is completely assembled in a 12 x 14 x 15 inch box.
Screw press weight = 22.0 pounds 180.0 USD
The wire mesh used to make the surface of the self-made paper mold was used to make a metal wire mesh for the surface of the self-defined paper mold. The number of meshes per inch was 4, the metal aluminum was used as the support layer, and the 30 mesh aluminum wire was used as the surface layer of the paper mold. The width of the screen is fixed at 3 inches, and the length can be determined as needed.
4 mesh wire weight = 1.0 lb/ft (3 feet wide x 1 foot long) 4.5 USD/ft (3 feet wide x 1 foot long)
30 mesh wire weight = 1.0 pounds/foot (3 feet wide x 1 foot long) $4.0/foot (3 feet wide x 1 foot long)
Making glass balls with a ruled roll 1. Use a glass ball with a diameter of 1 inch to make a traditional air-drying ruler roll. This is a very good modified device.
2. Drill a groove vertically in two parallel, horizontally placed wood plates. One side of the groove has a slight angle of inclination (10 to 15 degrees) and the bottom of the groove must be less than 1 inch.
3. Place the ball in the slot and pin the two small strips onto the block to prevent the ball from sliding out of the slot.
4. When the wet paper is slid up into the slot, the glass ball rolls up along the tapered bevel and deviates from the straight edge, allowing the paper to continue in it.
5. When the paper is released, the ball will slide down the slot, squeezing the paper between the glass ball and the straight edge. The beauty of this device design is that the heavier the paper will be, the more pressure it will have. Use a ruler to pull up the ball to remove the paper.
Glass ball 1 inch (diameter) Weight = 25 / pound 0.4 US dollars / month
Twinrocker's chronograph inventor was originally invented by Howard Clark of Twinrocker. It allows you to easily make paper at home and make each sheet appear different colors! It consists of 3 sets of plastic troughs. The bottom slot is a vat for holding water and catching overflowing water; the other two slots are used as molds and paper frames. Traditional paper molds are usually immersed in a vat of pulp, and the grooved mold system we talk about allows the operator to change the color of the paper, or add different inclusions, such as petals or leaves, to each individual paper. Wait.
Grooved Paper Guide Instruction Manual, 3 Grooves (Solution Bucket, Mould, and Paper Frame), Paper Size: 6-1/2/8-1/2-inch Weight = 2.0 lbs $29.50
Grooved Paper Components Twinracker Grooved Paper Components consist of a slot die, 12 felts, and a 1 gallon slurry.
Grooved Paper Components Grooved Paper Mould, Instruction Manual, 12 Sheets and 1 Gallon Twinrocker Prefabricated Cotton Fiber Sizing Weight = 11.5 lbs $59.0
Felt 12 "felt" (synthetic, non-woven), 12 x 18 inch, can be used to handle small pieces of paper.
Felt set of 12 pieces, approximately 12 x 18 inches Weight = 0.9 pounds $ 17.00
Unsupported rib mold This is a very strong mold, the polyester surface is tightly stretched, so no longer need support ribs. There are 3 optional sizes: 5-1/2 x 8-1/2 inches, 8-1/2 x 11 inches, and 11 x 14 inches. It is practical, sturdy and economical, and comes with a flat paper frame.
Unsupported rib mold 5-1/2 x 8 inches Weight: 0.7 lbs $44.50
8-1/2 x 11 inches Weight: 0.9 lbs $56.95
11 x 14 inches Weight: 1.3 pounds 86.25 US dollars
Various tangible paper frames suitable for unsupported molds
1. Envelope paper frame: A paper frame made of plywood birch plywood or pvc plastic that can be used to produce envelopes of size 4x5-1/2 inch. The processed envelope can accommodate 8-1/2*11-inch-sized paper folded into a square shape. It is recommended to purchase remoistenable adhesives to produce envelopes with sealing strips.
Envelope paper frame PVC plastic envelope paper frame, suitable for 8-1/2 x 11-inch mold weight = 0.5 pounds $ 16 Baltic Birch paper frame, suitable for 8-1/2 x 11-inch mold weight = 0.6 pounds 27.5 US dollars
2. Heart-shaped paper box:
Used to produce heart-shaped paper. This paper frame can only be made of PVC material. There are two sizes: one for 5-1/2/2-1/2-inch unsupported molds and the other for 8-1/2x11-inch unsupported ribs.
Heart-shaped paper frame PVC material, 4-3/4*5 inches, for size 5-1/2*8 1/2 inch mold weight = 0.3 pounds 12 USD
PVC material. 7-1/4*6 1/2" for Die Sizes of 8 - 1/2 * 11" Weight = 0.5 lbs. 16 USD
3. Circular paper frame: Can be used with 5-1/2/2-1/2-inch or 8-1/2x11-inch unsupported mold to produce round paper.
Round paper frame PVC plastic, 5 - 3/8 inch, for size 5-1/2 x 8 1/2 inch mold weight: 0.3 pounds 12 USD
PVC plastic, 8-inch for 8-1/2 x 11-inch molds Weight: 0.5 pounds 16 USD Material for the Baltic Birch, 8-1/3 inch, for 8-1/2 x 11 Inch mold weight: 0.6 pounds 27.5 US dollars
4. The custom-shaped paper frame is made of a waterproof “foam heart†and a custom-made special-shaped paper frame can be cut with a knife.
Custom Shaped Paper Frame 1/4 Inch Plastic Foam Heart, Suitable for 5-1/2 x 8-1/2 Inch Mold Weight = 0.1 lb 2 USD
1/4-inch plastic foam core for 8-1/2 x 11-inch molds, weight = 0.1 pounds, $ 3
1/4 inch plastic foam heart for 11 x 14 inch mold weight = 0.1 lb 4 USD
The basic components of unsupported mold and paper frame papermaking components provide beginners with all the necessary things to start papermaking. Includes: Unsupported mold with a flat paper frame; 4 mats, a basic guide booklet, 1 gallon made cotton fiber slurry. The mold can be used to produce 5-1/2 x 8-1/2 inch or 8-1/2 x 11 inch paper depending on the ordered assembly. This booklet can be obtained separately and additional materials can be ordered.
Rib-free rib mold assembly component A: Suitable for 5-1/2 x 8-1/2 inches unsupported rib paper die weight = 10.0 pounds 55 US dollars component B: for the size of 1/2 x 11 inches without support Rib die weight = 10.5 pounds 65 US dollars
The textbook package includes the "Papermaking Techniques and Techniques" written by Sophio Dawson; a flat paper die, an 8-1/2*11-inch paper frame; 12 mats; 2 ounce bottles of black, warm red, Warm yellow and blue pigments (our primary pigment); 5 gallons of pre-made 29# slurry in a bucket with moderate agitation.
Weight = 29.0 lbs $155.00
The Arnold Grummer tin pack Arnold Grummer developed this kit and included his book Tin Can Papermaking. With these components, it is easy to use two tin cans to recycle waste paper, which brings lots of fun to families and children. These components include: a papermaking screen; a support screen; a dewatering screen; 12 sheets of press-bonded paper; In addition, you must provide your own tin cans.
Tin can assembly weight = 0.4 pounds, $9.95
The latest GURMMER papermaking component is a perfect gift for paper-making beginners. It consists of a 30-minute paper disc, dip-type paper and paper frame, paper mesh screen, cover mesh screen, and two dry cloths. (Reusable), refined grain and cotton specialty pulp, dried flowers for papermaking, and instructions for using this component to produce paper briefcases.
Grummer Disc and Component Weight = 1.0 lbs $24.95
Book Binding and Paper Molding A qualified molding press produces 2,000 pounds of pressure and requires no maintenance. Can be used for bookbinding, as well as paper and flower molding, embossing, etc. Suitable for paper up to 8.5 x 11 inches in size. It is completely assembled in a 12 x 14 x 15 inch box.
Screw press weight = 22.0 pounds 180.0 USD
The wire mesh used to make the surface of the self-made paper mold was used to make a metal wire mesh for the surface of the self-defined paper mold. The number of meshes per inch was 4, the metal aluminum was used as the support layer, and the 30 mesh aluminum wire was used as the surface layer of the paper mold. The width of the screen is fixed at 3 inches, and the length can be determined as needed.
4 mesh wire weight = 1.0 lb/ft (3 feet wide x 1 foot long) 4.5 USD/ft (3 feet wide x 1 foot long)
30 mesh wire weight = 1.0 pounds/foot (3 feet wide x 1 foot long) $4.0/foot (3 feet wide x 1 foot long)
Making glass balls with a ruled roll 1. Use a glass ball with a diameter of 1 inch to make a traditional air-drying ruler roll. This is a very good modified device.
2. Drill a groove vertically in two parallel, horizontally placed wood plates. One side of the groove has a slight angle of inclination (10 to 15 degrees) and the bottom of the groove must be less than 1 inch.
3. Place the ball in the slot and pin the two small strips onto the block to prevent the ball from sliding out of the slot.
4. When the wet paper is slid up into the slot, the glass ball rolls up along the tapered bevel and deviates from the straight edge, allowing the paper to continue in it.
5. When the paper is released, the ball will slide down the slot, squeezing the paper between the glass ball and the straight edge. The beauty of this device design is that the heavier the paper will be, the more pressure it will have. Use a ruler to pull up the ball to remove the paper.
Glass ball 1 inch (diameter) Weight = 25 / pound 0.4 US dollars / month
Blend Essential Oil,Star Anise Oil,Jasmine Oil,Essential Oil Kits
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxnaturaloils.com