Paper dryer stripper

Stripping agent is mainly used for the stripping of middle-to-high grade toilet paper, light paper, printing paper, aluminum thin liner, craft woven paper and high-grade wrapping paper. It can improve the softness of the paper and improve the hand feeling. At the same time, it has antibacterial and hygroscopic properties and effectively improves the softness of the handkerchiefs and napkins. Keep your tissues and napkins moist. Solve the problems of the traditional application of oil removal cylinder. It is the additive of the world's most upscale domestic paper. Has the following advantages:

1.Improve the contact condition between the paper and the drying cylinder, give the paper a good peeling performance and keep the system clean sheet without oil stains

2, greatly improve the paper surface smoothness, gloss, does not affect the strength of the paper

3, can reduce paper breakage, hair loss, powder off phenomenon

4、 Non-ionic can adapt to various papermaking systems

Second, technical indicators:

Appearance: pale yellow liquid

Ion type: Non-ionic

Active ingredient: 99%

Viscosity: ≤30mPa·s/25°C

Solubility: Cold water soluble

Third , product characteristics:

1, less use, easy to operate

2, good stripping effect

3, effectively improve the smoothness of the sheet, improve the surface properties of the sheet

4, because of non-ionic, good compatibility with other chemicals

Fourth, use method:

1. Before use, dilute at normal temperature and soft water according to the usage ratio, and continuously spray to the dryer surface. Metering rolls can also be applied evenly to the dryer surface.

2, the amount of general 0.3 ~ 1.0 kg / t dry pulp, but should be subject to increase or decrease depending on the specific circumstances of the stripping.

Fifth, packaging and storage:

  1, plastic barrels, net weight 200kg / barrel. Store in a cool, dry and ventilated place. Pay attention to the seal to prevent freezing and exposure. Storage temperature is 4 ~ 35 °C, storage period is more than 12 months.

2. The following symbols should be on the packaging drum: product name, factory name, batch number, net weight, production date, and product certification.