[Chinese Packaging Network News] Most of the products require an exquisite packaging, in terms of the color of the box printing, if the color is very different from the sample, it will be a terrible problem for the box printing manufacturers, according to its The degree of difference will directly produce two results. The first charge will be reworked, or the price will be reduced. However, both results will bring huge losses to the printing press manufacturer's economy. People rely on clothes to rely on the saddle not only to lose the aesthetic value of the product, but also It also causes the product to be reduced by people's expectation. Therefore, when the box printing manufacturer receives the order (the buyer emphasizes that the product is the same color as the box), it will pay extra attention to the color difference between the product and the box.
Too bad custom packaging box will cause great losses to the merchants, and will also cause bad influence to the custom manufacturers of the box, lose the trust of the customers, lose the recognition of the industry, and thus lead to the damage of the manufacturer's own image in the industry. Difficult to get development. However, some color errors are within a reasonable range. We call it a reasonable error. The main ones are:
The first one is that there is a certain degree of inconsistency in the color before and after the inside of the same batch of printed matter; the first difference is also an objectively existing problem that the printing machinery itself has always been difficult to solve. During the printing process, the ink is a dynamic and balanced process. During printing, when the ink on the ink roller is reduced to a certain extent, the printing machine automatically inks to compensate. And a certain degree here will directly lead to the deviation of the color of the finished product printed on the front of a batch of printed jobs and the finished product printed on the back side.
The second is the deviation of the color of the printed matter and the proofing; that is, we often say that the printing cannot catch up with the proofs. The reasons are ink problems, paper problems, and dot recovery problems. For this difference, the printing staff should try their best to catch up with the sample. If the difference is very large, the customer should be informed in time and the customer should sign the sample in person.
The third kind is that there is a deviation between the color of the printed product and the actual color of the product. The third difference is in fact a psychological problem. For example, some customers think that the printed product is not exactly the same as the actual color of the product itself, and it is considered to be detrimental to the company’s image or even to the company’s order. The custom manufacturer of the box thinks that the color deviation is acceptable. For this kind of situation, it should be said that this kind of deviation exists objectively and cannot be completely attributed to the responsibility of the custom manufacturer of the box. This is an objective existence of manufacturers can only minimize the error, but can not be completely avoided.
Accurately stated in the printing process of the packaging box, the color of the printed product is not completely consistent with the proofing. The proofing is to find the standard reference. The packing box printing manufacturer should add one under the printed matter: the color in the printed material is for reference only. The color prevails in kind so as to avoid unnecessary disputes.
The color difference of the packaging box will be strictly checked by the packaging printing factory, because it also accounts for the important parameters of the packaging success. Therefore, the color difference can be avoided as much as possible, and the error can not be avoided to the minimum. Only in this way can it be produced. Buyers satisfied with the product for the company to accumulate long-term business partner box.
Sit On Top Kayak,fishing kayak Co., Ltd. , http://www.nskayak.com