SPECIFICATIONS:
Item No.: D12
Model: Diving Light
Brightness: Max 1000 lumensÂ
Bulb: CREE XM-L2 LED,
The lifespan of LED: About 50,000 hrs
Color Temperature of LED: 6500kÂ
Three Brightness Levels: High(100%)>Low(30%)>Strobe
Runtime: High: 4.0 hrs Low: 7.8 hrs Â
Body Material: Durable Aircraft-grade Aluminum
Angle of Light Beam: 5°light centre beam,110°light periphery beam.
Surface Treatment: Premium alloy with type III hard anodization for resisting seawater erosion.
Body Color: Black/ Blue
Lens: 4mm clear PC
Battery: 26650 Li-ion Battery *2.
With battery over-discharging protection, polarity reversing protection
Operation Voltage: 5.6 to 8.4V
Waterproof: 100 Meters Underwater/IP68
Impact Resistance: 1.5 M
Net Weight: 295Grams (w/o battery); 551 Grams (w/battery)
Under seawater: 290 Grams (w/battery)
Dimensions: 235(L)x32(body dia.)x56.6(head dia.)mm
Switch: Tail switch
Operation: Repeated rotation tail within one second to cycle through 3 modes.
NOTES:
1. The Diving Light with special fixture.It would be damaged if disassembled at your own discretion.
2. Pl inspect the O-rings carefully every time you finished diving and change the broken O-rings when necessary.
3. After every diving,pl clean the flashlight body with fresh water,and store it properly after full dried.
Â
BATTERY INSTALLATION
1. Remove the tail by turning counter-clockwise.
2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
3. Mount the tail by turning clockwise.DO NOT ACTIVATE IT YET.
Â
BATTERYÂ CHARGING
1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the batter is not fully charged; It will turn green after fully charged.
4.Take out the fully charged battery and use them in the diving light.
  Â
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
Â
CAUTION
If the light is not to be used for sometime,remove the batteries to prevent possible leakage or corrosion.Pl remove the batteries during transportation to prevent it from incorrect operation
Â
WARRANTY: One Year
Â
Decal Painting Tableware is loved by families all over the world, and consumers like the design of decals. Ceramic Decal Printing is delicate and moist, the pattern is clear, and each set of decal tableware is full of elegant temperament.
High-strength reinforced porcelain body, using high-quality porcelain clay, hygienic, healthy and environmentally friendly, high-temperature glaze color, high-temperature firing, meet lead and cadmium control standards, safe and non-toxic, resistant to scratches and not easy to fade. The glaze is smooth, easy to clean, practical and simple.Each product is carefully designed, drawing inspiration from life, beautiful and fashionable. High quality ceramics, crystal clear, high temperature firing, lead and cadmium free. Smooth glaze, white as jade, warm color, clear glaze. The world is big, just take a spoonful of porridge and a meal, and every meal is delicious.
Custom Ceramic Decals, Ceramic Decal Printing, Porcelain With Decal, Vintage Ceramic Decals
Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com