[ Chinese wardrobe net ] the reason for the deformation of the wardrobe door
First, damp. The high moisture content of wood is another major cause of deformation of the wardrobe door. As the water content decreases during use, the internal stress of the wood will slowly appear, eventually leading to deformation and cracking.
Second, the design structure. Whether the design structure of the wardrobe door is reasonable (including internal); whether it is made according to the process requirements in actual production; whether the glue is fully cured; whether the transportation and placement meet the requirements; the environmental condition of the use place is also an important cause of deformation of the wooden door.
Third, the material problem. No matter what the wardrobe door has wood composition, and wood and other objects have the characteristics of shrinking and swelling, wood logs are natural, and the degree of deformation is specified to be more serious than synthetic materials. Moreover, the wardrobe door has a large area and a small number of fixing points, so that deformation and cracking are most likely to occur.
Fourth, the effect of finishing putty, when the door parts are painted, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost, because these two putty contain a lot of water, the commonly used substrate of the plate furniture - The medium density fiberboard and the particleboard are particularly hygroscopic. Therefore, when one side of the door panel member is not put with putty and the other side is coated with such a water-rich putty, the door panel member is hygroscopic and deformed.
Fifth, the impact of the drying process In the production of many manufacturers, when the board is coated with putty or paint, it should be placed on the drying rack for natural drying, if the pole of the drying rack is too sparse or uneven, it will also cause The door components are found to be bent and deformed during the drying of the paint.
6. Improper treatment of the coating, which causes the internal stress of the deformed coating of the panel furniture component. After the coating is cured, a certain coating will be formed. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, It will become one of the main reasons for the bending deformation of the door components.
closet door
Treatment method of wardrobe door deformation
There are several types of wardrobe door deformation. One is a pseudo-deformation that is caused by changes in the environment of use. If the window is open and the winter is dry and cold, the side of the door that is close to the window is likely to form a "bend bend" (bending toward the window); when the summer is hot, the door is likely to form a "bridge bend" (bending toward the room). However, after a year of changes in the seasons, the door will stabilize.
Some deformations are quality problems, such as unreasonable material selection. The wood must meet the moisture content requirement. Too high or too low will cause the door leaf to deform. The plate and the door core are bonded together by white latex under pressure, and the solidification fastness is guaranteed to be the same, and the door leaf cannot be moved freely before the white latex is fixed.
If it is a wooden closet, just wipe it with a clean rag, but if it is dirty, use soap or a neutral detergent and wipe it with a damp cloth. Avoid the use of irritating and corrosive chemicals such as alcohol and detergents that are easily damaged by wood. Ultraviolet rays are also destructive to wood furniture. Therefore, it is necessary to use cloth or curtains to avoid sun exposure.
The reason for the deformation of the wardrobe door may be caused by many aspects, so we must pay attention to the overall maintenance of the wardrobe in daily life to avoid problems such as moisture.
Environmental health, because of this, Ceramic tableware as early as 17-18 centuries on a large number of foreign flow, then has become the world's favorite use of tableware.
2.
The surface of ceramic tableware is smooth and easy to clean. This is the biggest advantage of pottery and porcelain tableware, clean easily, often need not clean agent to be able to clean very clean.
3.
The plasticity of ceramics is strong and the patterns are diverse, which can make various tableware of different shapes. Can mold clay all sorts of shapes, no matter be cup, bowl, dish is waited a moment, can use pottery and porcelain, people often can use the pottery and porcelain tableware of a whole set, the tableware of a similar decorative pattern, each other echo, can yet be regarded as a scenery line in the home.
4.
Stable chemical properties, durable, slow heat transfer, not easy to hot. Porcelain has a certain acid, alkali, salt resistance, not easy to chemical reaction with these substances, will not rust aging. At the same time, it also has the characteristics of slow heat transfer and is not easy to burst under the rapid heat and sudden cooling changes of a certain temperature difference.
Stoneware Dinner Set,Stoneware Cookware,Stoneware Dishes,Stoneware Dinnerware
Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com