XL-500A graying tester installation method
1. The product should be firmly placed on the laboratory workbench.
(1) Take out the chimney in the packing box and insert it into the top of the furnace body. Please adjust the opening and closing position to work.
2. Before starting the work, check whether the wiring of the electrical system is correct and reliable, and whether the equipment is grounded. If abnormalities are found, they should be dealt with in time.
3. The operator must read this instruction manual carefully.
4. If you need to maintain or repair this product, please contact our company to use our spare parts to ensure product performance.
5. Please keep the furnace clean and remove the retentate such as oxide in the furnace.
6. Open the back cover at the bottom of the ash analyzer, and insert the power cord and sensor cable of the ash meter into the controller of the ash analyzer, and connect the power cable and sensor cable to the corresponding In the terminal block, (the red line corresponds to the red line, the blue line corresponds to the blue line, and the sensor connection line is connected accordingly. Note that the positive and negative terminals of the sensor connection line cannot be reversed,).
7. Connect the power cord of the gray meter to the power switch or air switch. For safety, the instrument must be grounded and well grounded.
XL-500A gray tester button description:
1. The confirmation button is used to enter the function interface and start the experimental project.
2. The ↠or → key is used to select the experimental item (the selected cursor is blinking) and the process selection
Used for left and right shifting in the optional program.
3. Volatile matter - used for the determination of volatiles in coal.
4. Ash - Determination of ash used in coal.
5. Bonding - used to determine the bond index of coal.
6, optional - for the temperature test of their choice.
7. Settings - used to set temperature, time and parameters.
CONTUO Products presents this Manual Converter desk. Elevate your work flow. Our standing desk creates a healthy work space allowing you to balance between sitting down and standing up. The 2-tier design features a monitor tabletop and a keyboard drawer. Ergonomic and innovative, this adjustable standing desk features a smooth, gas-spring lift mechanism with 8 height settings. Raise or lower your work surface within seconds with the push levers located at both sides of the table. The spacious work surface can hold and display dual monitor setup while having space left over for pencil holders and other accessories. Take your productivity and comfort in the work place to new heights, with the Standing Desk Converter by CONTUO.
So, here you can find all the Height Adjustable Desk for working.
CONTUO Height Adjustable Desk for office are very popular in the world.
Manual Converter Desk,Office Desk Converter,Manual Standing Desk Converter,Desk Riser Converter
Shaoxing contuo Transmission Technology Co.,Ltd , https://www.electricdesk.nl