What are the eight requirements for securities printing

1. When printing securities, generally print the pattern first, then print the pattern, text and numbers.

2. When copying manuscripts such as register prints, the printing color sequence should be as consistent as possible.

3. New year pictures, monthly calendars and other types of printed matter with spot color borders, spot color borders are usually printed last.

4. Prints that need to be printed in India, the color sequence of the printed matter is generally opposite to the color sequence of surface printing.

5. There are glazing, hot stamping (hot stamping aluminum), and printed products with lamination requirements. In the process, color ink is printed first, followed by glazing, bronzing and lamination. However, for some printed products with special requirements, when the other colors need to be printed on the anodized aluminum, the above process flow will be changed. At the same time, it should be noted that the adhesion of the ink should not be greater than the adhesion of the anodized aluminum print and the first printing The adhesion of the ink layer to the anodized aluminum.

6. When printing gold and silver ink on the printed matter, because the adhesion of gold and silver ink is small, gold and silver ink should be placed in the final printing. If there are characters and patterns on the gold and silver ink, the text should be printed separately.

7. The superiority of the last yellow ink in four-color printing. â‘  Due to the good transparency of yellow ink, the arrangement of the last color printing is convenient for enough white light to enter the upper and lower ink layers to obtain bright and bright colors, which is conducive to the printed matter to achieve better color reproduction. â‘¡Yellow ink has faster drying performance and larger printing area. Arranging the yellow ink in the last color printing can not only prevent the vitrification caused by the drying speed of the yellow ink is too fast, but also make full use of its large printing area and can quickly oxidize the conjunctiva, covering the surface of other ink layers Give printed matter a certain glossiness.

8. In short, in the specific printing process, the best printing color sequence should be flexibly selected according to the quality requirements of the printed matter according to the overprinting rule, so as to avoid weaknesses, control color deviations, and print the most ideal printed matter.

Silicone Kitchen Tools

Name: Silicone Kitchen Tools
Material 100% food grade silicone
Size

Total Length:Skimmer:38.2cm

Slotted spaghetti:35.5cm

Slotted turner:30cm

Spoon:37.5cm

Slotted Ladle:37.5cm

Soup Ladle:33.5 cm

Weight 948.3g/set
Usage

Ovens,Microwave ovens,Dishwasher and Freezer

Feature BPA-free, heat resistant, food grade
Color any pantone color
  • Silicone Kitchen Tools Set includes slotted turner, slotted spoon, Slotted turner , solid spoon, ladle, pasta fork
  • Silicone Kitchen Tools Practical and stylish, these tools have a soft-grip handle making them comfortable to hold and heat safe to 400 degrees fahrenheit.
  • Silicone Kitchen Tools Nylon tools are perfect for nonstick pans
  • Silicone Kitchen Tools Dishwasher safe for convenience

 Silicone Kitchen Tools Pictures:

kitchen utensils

Silicone Kitchen Tools

Silicone Kitchen Tools,Silicone Kitchen Utensils,Kitchen Gadgets,Essential Kitchen Tools

Shenzhen Feiaoda Technology Co.,Ltd , https://www.flysilicone.com

This entry was posted in on